PG-5 CABLE STRIPPER
Easy to use cable stripper for cables with a diameter
larger than 1" (25mm)
Cutting Depth: .20" (5mm)
Operating Instructions:
- Adjust cutting depth by turning red knob.
- Turn knob clockwise to increase depth of blade
- Turn knob counterclockwise to decrease depth of
blade
- Place tip of blade over the top of cable and, holding
thumb firmly on top of cable slitter, begin to push handle downwards. The
slitter's blade begins to cut through the cable's insulation. Repeat this
operation until the desired slit is obtained. (see Figure 2)
- Turn the tool 90° to begin the slitting
operation around cable (see Figure 3) Continue this operation until cable
insulation is completely removed.
- For additional information, please click on the Video
tab.
